With standby generator load management, you can prioritize your loads in a specific order so that you won’t overload the generator. This way, life can continue as normal. You can also set the system to turn off secondary systems automatically or in a preset order. The next time the power goes out, you can be sure that everything is still working. But before you choose a system, make sure it has the proper certification.
NFPA 110 specifies a number of requirements for standby generator load management. One of the most important requirements is the timing of generator start-up. The generator set manufacturer must account for a minimum delay of one second when evaluating its performance. The time delay is necessary to stabilize generator frequency and voltage.
The NFPA 110 standard is divided into two parts, Part 1 addressing the requirements for a backup power system. The second part of the standard deals with installation, testing, and maintenance of the back-up power system.
aXis home standby technology
AXis home standby technology uses Power Line Carrier technology, which eliminates communication wires, to manage the load of multiple appliances simultaneously. The modules monitor the power output of each generator and only allow high-demand appliances to run if there is sufficient generator power available. This enables a smaller generator to power a large home without worrying about overloading the system.
When a home standby generator is connected to the electrical grid, load management controls the power distribution to prioritize critical systems. This ensures that critical systems are always powered, even if some of the less-important ones are turned off during a power outage. The process of load management can last the entire duration of a blackout.
Kohler power relay modules
Kohler power relay modules are similar to Generac’s power relay modules in that they attach to up to four individual power loads. These relays are controlled by a load management device on a transfer switch. These devices open and close relays when they receive a signal. If a relay is closed, the connected load is not powered. This way, a user can prioritize loads, such as those that consume a lot of surge power.
A standby generator with a power relay module can help prioritize your power needs during a power outage. The modules prioritize circuits based on demand, and they cycle certain circuits on and off to avoid overload. In order to use a Kohler power relay module, you need to connect your single-phase Kohler(r) generator set to an RXT or RDT transfer switch with a load management board.
The Cummins PowerCommand(r) Load Control Module (LCM) regulates standby generator loads. It is an independent load management controller that comes in a cost-effective package. It supports an isolated bus topology and easily aligns with onboard paralleling breakers. It allows you to manage loads and make the best use of your standby Generator Sets.
This system is compatible with Cummins RS13, RS17, and RS20 Air-Cooled Generators. It automatically disconnects and reconnects heavy loads and prevents overload. It is one of the best power management systems available. It has multiple features and is easy to install. It also reduces noise from the generator.
Champion power modules
If you’re in the market for standby generator load management, consider the aXis series of power modules from Champion Power Equipment. This 14 kW, 100 AMP system runs on your home’s fuel supply, and it automatically starts and shuts off when utility power goes out. It is UL and CSA listed for outdoor or indoor use. Champion power modules are backed by a two-year warranty, and a lifetime technical support plan is included for free.
For more information about standby generator load management, contact a Champion dealer near you. A representative will be able to walk you through the installation process and give you an accurate quote. Some dealers even come to your home to make sure you have a complete installation plan, including where to install the generator, how to connect the system to your home, and what materials you’ll need.
Briggs & Stratton power modules
Standby generators can be equipped with power modules to manage large electrical loads. Typically, these power modules are attached to four separate loads and work in conjunction with the transfer switch to regulate power flow. The transfer switch sends a signal to the power modules to open or close the load. When the load management device is closed, the connected loads are turned off. The modules also allow users to set a priority for certain loads. In the event of a power outage, only the priority loads remain on.
Briggs & Stratton’s 16kw standby generator is the ideal choice for medium-sized homes. This generator will provide reliable backup power for your home while helping you manage your budget and prioritize the power you use. Its modular design allows for easy installation, and the “Standby Generator Management” app makes it easy for homeowners to adjust priorities and avoid overloading their generator.
Generac power modules
Generac power modules are designed to maximize the performance of standby generators and PWRcell energy storage systems. These modules communicate with a transfer switch and monitor selected circuits. They automatically supply power where it is needed and prioritize loads based on their level of need. Up to eight Smart Management Modules can be used with a single standby generator. In addition, they can be set to prioritize different loads based on the frequency at which they are consumed.
A home standby generator with power modules is an affordable solution for managing multiple loads. They are designed to prioritize the highest-priority loads and minimize interruptions. In addition, these modules have the flexibility to handle up to four loads.