Home Generator Installation Requirements

home generator installation requirements

When it comes to the installation of a home generator, there are certain requirements that you need to consider. For example, you need to get a permit and protect your new generator from pets, traffic, and animals. Also, you need to ensure that you choose the right size of generator for your home.

Place your generator where prevailing winds will blow the exhaust away from your home

If you’re looking to improve your chances of surviving a natural disaster then consider a home backup generator. A standby generator can keep your lights on and your AC in check no matter what the weather’s like. While not the sexiest component of your home, a properly maintained unit can serve as a lifesaver if the power goes out. The trick is to plan for the possibility that the power could be cut off at any time. With a little preparation, your family can enjoy a comfortable and stress free home in no time at all. Just be sure to follow the manufacturer’s instructions.

Determine the size of your generator

There are many types of home generators to choose from. However, deciding which one is the best is a tricky process. The best way to choose the right generator is to make sure it meets your home’s power needs. To do this, use a generator sizing guide.

Homeowners with large appliances need a bigger generator than those with smaller ones. These may include an HVAC unit, water heater, microwave, and toaster. Additionally, a larger generator will prevent damage and ensure adequate energy flow during outages.

When you want to know the size of your home generator installation requirements, start by listing all the devices in your home. You can check the owner’s manual of each device to find the wattage requirements.

Then, add up the wattage of all your appliances. This will give you an approximation of how much wattage your generator needs.

Protect your generator from pets, animals, and traffic

If you have been fortunate enough to have a home generator, or are in the market to purchase one, there are some things you should know before you pull the trigger. For example, it’s important to keep in mind the fact that you should never put your generator in an enclosed building. This is because the fuel that burns in the hot engine parts may ignite, which can lead to a serious fire. Plus, it’s a good idea to keep your generator away from open doors and windows.

One of the most important things to remember is to ensure that your machine is properly connected to the electrical system in your house. The proper connections will reduce the chances of accidental disconnection due to vibration or moisture. Likewise, you should only use heavy duty extension cords to ensure a long lasting connection.

Get a permit

If you are planning to install a whole home generator, you will need to obtain a permit. The cost of the permit depends on the municipality and the set fees for each type of permit. You can check the permit cost on the local building regulator’s website.

Some permits require engineering drawings. These drawings show where the generator will be installed and where the electrical and gas lines will be. They also show the clearance from windows and combustible materials. This is important to prevent any future accidents.

In addition, you will need to provide homeowners association approval. The homeowners association must be notified where the generator is located and how much power is going to be used.

You may need a separate fire permit for the generator. There are also air permits if your generator emits pollutants above the state’s thresholds.