Choosing a Backup Generator For Your Ups

backup generator and ups

When deciding on a backup generator for your ups, there are some important factors to consider. You need to ensure that it’s sized appropriately to fit the load and also to ensure that the personnel who will be using it will be safe. Additionally, you will need to find a company that you can trust.

Temperature plays a major role in a backup generator

The best way to get a leg up on your competition is to take the plunge and go for a well suited backup generator and UPS combo. A power surge or outage can spell doom for your valuable equipment and files, so it’s imperative you make the right choice the first time around. Fortunately, there are plenty of options to choose from. Most will include a battery set tucked away in a convenient location, while others will allow you to hardwire your new toy. If you have the budget, you may even consider a combination power and cooling unit, if your equipment requires a little more air flow. Regardless of the chosen form factor, you’ll want to ensure your rig is properly maintained. Plus, you’ll never have to worry about an unexpected outage again. And that’s the best part. With a little planning and foresight, you’ll be able to enjoy the luxury of working in peace and quiet for years to come.

Proper generator sizing is essential to ensure the safety of both the UPS load and personnel

There are many factors involved in the proper generator sizing for your UPS system. These include ensuring that the UPS and generator are compatible and also the actual load that you need to protect. You must first consult your local fire officer or electricity utility provider.

Sizing a generator is a process that is not simple. It involves fuelling and installation. The correct generator sizing is necessary to ensure the safety of both the UPS load and personnel.

To start, you must measure the actual load that you need to protect. For example, if you have a 1000-watt device running at 120 volts, you will need 8.33 amps from the UPS. In this case, you should size the generator so that it has a power rating of approximately 125 kVA/100 kW.

You must increase this amount if you plan to add additional electrical equipment to the load. Also, you need to consider the temperature. Normally, a generator rises about 10 degrees Celsius when it is running. If the ambient temperature is lower than this, the generator will not function correctly.

Line-interactive vs off-line devices enable battery backup

When choosing the best battery backup system, it is important to understand the difference between online and off-line technology. Online systems utilize an inverter to transmit power to a battery. Off-line devices, on the other hand, use a transformer to convert raw mains power into an electrical flow. The output is then connected to a load by means of a switch.

Both technologies have their pros and cons. Despite the differences, both offer reasonably good protection from common power issues. Line-interactive systems provide more control over the power fluctuations that plague many networks. Specifically, they boast an ability to boost voltage output, which translates to reduced switching transients. Additionally, line-interactive technologies allow for safe and secure shutdown of electronic devices. However, they are more expensive to purchase than their on-line counterparts. Consequently, they are less suitable for applications with higher voltage requirements.

One of the major drawbacks to an offline UPS is its inability to maintain perfect power during minor sags. On the other hand, a good quality online unit can deliver the power you need, and the right model can live up to the “uninterruptible” moniker.

Co-operation with authorities is necessary

If you’re looking to install a backup generator, you should consider co-operation with the local electricity utility company. This is necessary because of the regulatory requirements for fuel storage. Most parts of the UK are subject to strict regulations regarding the storage of fuel oil. For this reason, you will need to double-bundle the tank to ensure that the oil/fuel mixture does not escape into the water environment.

To get the best results, you will need to ensure that the generator is sized and installed properly. Several factors contribute to this, including physical and design compatibility, as well as the suitability of the environment in which it is used. You may also need to obtain the local authority’s planning permission.